All Products
Contact Us
Building 6,No. 33 Gaojia Road, Niutang Town, Wujin District, Changzhou, Jiangsu 213168, China
Pleated Filter Cartridges
70" PP Pleated Filter Cartridge for Power Plant
The 70 inch power plant filter element uses ultra-fine polypropylene fiber membrane as the filtering medium, with low pressure difference, high throughput, and good filtration accuracy. The equipment has a small diameter and occupies less space. The interface adopts internal thread connection, which is easy to install.
OD80mm Industrial Pleated Filter Cartridge
The larger filtration area and pollutant holding capacity of a single filter extend the service life of the filter element, reduce the frequency of filter element replacement, and lower costs.
OD130mm Industrial Pleated Filter Cartridge
The multi fold large fat filter element adopts filtering materials such as PP filtration membrane/polytetrafluoroethylene (PTFE) filtration membrane, which has long-lasting performance. The center rod and end cover of the filtering medium are glued together as a whole to ensure better sealing of the end cover. Due to its folding design, it provides a larger filtration area, longer filtration life, reduces the number of filter element updates, and reduces filtration costs.
PBT Skeleton Pleated Filter Cartridge
PBT skeleton cartridge is made of polyester-based material,Itisidealforthefiltrationofbenzene,meth-ylbenzenecontainingaromaticsolvent.
Glass Fiber Pleated Filter Cartridge
The product is made of glass fiber membrane and non-woven fabric,has excellent chemical Compatibility,high temperature resistance and oil resistance,it is suitable for etaining colloidal substances from high-load and high-viscosity fluids which can save the filtration cost.
This product uses a fully polypropylene structure and the filter material meets FDA requirements. The filter layer and support layer are both made of non shedding polypropylene fiber filter material. It can be widely used for clarification, sterilization filtration, and refined filtration of solvents in the biopharmaceutical industry.
The PES filter cartridge is constructed of hydrophilic PES membrane and PP supports.The membrane with asymmetric structure has excellent filtration performance and reliable bacterial retention ability.t can withstand repeated steam sterilization and widely used in the final filtration,sterile filtration.
Hydrophilic PVDF Pleated Filter Cartridge
The hydrophilic polyvinylidene fluoride (PVDF) microporous folding filter adopts a hydrophilic polyvinylidene fluoride (PVDF) (abbreviated as PVDF) microporous filter membrane. It has good mechanical properties, temperature resistance, and corrosion resistance, second only to polytetrafluoroethylene (PTFE), especially excellent resistance to acidic liquids, and can work for a long time in an environment of 90 ℃. Especially suitable for sterilization and filtration of culture media, biological agents, and vaccines in biopharmaceuticals.
Hydrophobic PVDF Pleated Filter Cartridge
The hydrophobic polyvinylidene fluoride (PVDF) microporous folding filter adopts a hydrophobic polyvinylidene fluoride (PVDF) microporous filter membrane. It has strong negative electrostatic and hydrophobic properties, as well as high porosity, low gas resistance, and high throughput. It can be widely used in biological fermentation, air sterilization and filtration in the pharmaceutical industry, as well as clarification and sterilization filtration of organic solvents.
Hydrophilic PTFE Pleated Filter Cartridge for Liquid Filtration and Sterilization
The product used super high hydrophilic PTFE membrane which has the high Flow rate, excellent chemical compatibility,heat and corrosion resistance,it's Ideal for the filtration of aggressive liquid and organic solvents.The membrane is hydrophilic which can filter the liquid directly without pre wetting to save the operation time.
Hydrophobic PTFE Pleated Filter Cartridge for Gas Sterilization and Filtration
Jinchun PTFE pleated filter cartridgeis made of high porosity ydrophobic PTFE membrane,which has the characteristics of high flux and long service life.Can be used for air and gas terile fltration of pharmaceutical,biopharmaceutical and ermentation industries.
JC deep roll filter cartridge is made by winding continuous multi-layer polypropylene (can be made of other materials) filter material, suitable for pre filtration of liquids with high particle impurity content. The filter element gradually becomes finer from the outside to the inside, and is wound up with different fiber diameters to form a gradient filtration. The unique gradient winding process not only ensures the filtration effect, but also increases the dirt holding space of the filter element, which can further extend the service life of the filter element.
Various membranes can be used according to customer requirements, and the housing material is made of high-temperature polypropylene, which is joined by hot-melt welding.
Nylon Pleated Filter Cartridge
This product is made of nylon microporous membrane and flow guiding layer through integral structure hot melt welding. No adhesive, no medium detachment. The filter membrane is naturally hydrophilic, alkali resistant but not acid resistant, and has strong solvent resistance, making it suitable for filtering liquids, especially alkaline liquids. It is generally used for terminal filtration units such as liquid particle removal and sterilization filtration, and has a wide range of applications.
PP Melt-blown Filter Cartridge
Made by thermally bonding ultrafine polypropylene fibers without using any chemical adhesives, the fibers self-adhere randomly in space to form a three-dimensional microporous surface with a filtration efficiency of up to 99%.
It is a deep-bed filter element designed for filtering low-viscosity fluids with minimal impurities. It is manufactured by precisely winding textile fiber threads (such as polypropylene or degreased cotton threads) onto a porous support structure (made of polypropylene or stainless steel) using a specialized process. The resulting structure features a honeycomb-like configuration that is loosely arranged on the outside and densely packed on the inside, enabling it to effectively remove suspended solids, fine particles, rust, and other contaminants from fluids. This filter element boasts exceptionally excellent filtration performance and adsorption capacity.
CONTACT US
Address:Building 6,No. 33 Gaojia Road, Niutang Town, Wujin District, Changzhou, Jiangsu 213168, China
Tel:86-519-88820135
Email:CZJC@jsjinchun.cn
Copyright © 2025 Changzhou Jinchun Environmental Protection Technology Co., Ltd.